Sometimes the windshield of our cars can get damaged by a strong impact we hardly notice was coming thus leaving the windshields of our car damage and in need of repair. 

  

 

 

 If you have a crack on your windshield that can be repairable here is an option for you. 

 

  • Buy a Repair Kit for your Windshield 

 

These repair kits can be bought from the department store in the auto parts section and is accessible at stores like Target and Walmart, moreover it can also be bought at stores that sell auto parts. If you fail to acquire from stores, you can try searching for the kit at amazon and it can easily be you within 24 hours.  

 

Always remember that when you use your repair kit for the windshield of your car, use it on a dry surface! 

 

Here are some repair kits to choose from 

 

  1. Pre-Mixed Adhesive 

 

This type of repair kit includes an adhesive and a syringe to easily apply the solution. The first step is to remove the back film of a precut strip of adhesive then apply it to the glass that is clean making sure that the chip part is centered. After making sure the chip is centered, peel the rest of the film. 

 

The trick on this type of kit is to look closely at the time on your watch or set a timer on your smartphone. Hold your syringe with stability on the part needing the adhesive and hold the syringe for a minute. Repeat the suck then slam process in order to make sure the crack will be filled entirely with adhesive. There can be a bulge formed after the process, thus prepare a sharp blade so you can cut off the bulge in one swipe. 

 

2. Two Part Adhesive 

 

Compared to a pre-mixed adhesive a two-part adhesive is seldom used. This type of adhesive for your windshield is composed of 2 vials, one containing adhesive and the other the hardener. The 2 vials are then mixed in the syringe before starting the repair process. 

 

Since this type of adhesive also uses a syringe, you might expect you will be doing the same process however that is not the case with this adhesive. Instead of a rapid release like what we did when using a pre-mixed adhesive that needs to be done in a minute, this adhesive needs more steps to work.  

 

Unlike the suck then slam process, this adhesive needs a vent then suck, followed by another vent then squeeze. Through this you are actually introducing the adhesive to the crack. 

 

Over the counter repair kits might be accessible however there are certain steps you need to take to make sure that the adhesive does the job to the chip that is on your windshield. Sometimes, a chip can also turn into a crack and a crack can get worse if not handled as soon as possible. In order to avoid these steps that might confuse you, windshield repair or replacement service is offered by professionals through autoglassrepairdenton.com.